#Automatic fish feeder for tank with lid manual#

For larger amounts, program the Feeder for double portion. DO NOT use for live or freeze dried foods.Īdjust the Sliding Cover on the Food Container to control the amount of food dispensed. The Automatic Feeder is recommended for dry fish foods such as flake food and granules. Place the cover back on and insert the Drum unit onto the Axis. Clean the Drum, making sure it is dry before filling it with food. Take out the Food Container and remove the cover on the back.

#Automatic fish feeder for tank with lid manual#

The next feeding time will be displayed and it can be programmed in the same manner.įor feeding outside the programmed times, press the 'EHEIM' Manual Feeding Button to manually trigger the rotation of the Food Container. Press the '+' Button once for a single ration and press the '+' Button twice for a double ration.įinally, press SET > Feeding Time 1 has now been entered. Then press MODE again > The Digit '1' will blink. Then press SET > 'Hours' will blink and the desired number can be entered with the '+' Button. Press MODE > Feeding Time 1 is displayed as '00:00' with the digit '1' on the upper section of the LCD. Then press MODE > 'Minutes' will blink and the desired number can be entered with the '+' Button.įinally, press SET > Current time has now been entered. Press SET > 'Hours' will blink and the desired number can be entered with the '+' Button. SET stores the programmed time and scrolls to the next feeding time to be programmed.Įxample: After the batteries have been inserted, the Time begins at '00:00' and the Arrows will blink at one second intervals. The Time and Feeding Mode can be set to a higher number with the '+' Button. With MODE, the displayed time can be changed between Hours and Minutes, as well as the Feeding Mode. SET allows the displayed times to be changed. The feeding times are differentiated by digits (1-4) appearing on the upper section of the Display. The current time is displayed whenever you see the blinking arrows. MODE switches initially between the current time and the feeding times (1 to 4 consecutively). This extends the time interval for feeding without engaging additional feeding times. No Arrow = The Time is stored but no feeding occurs.ġ Arrow = The Feed Container rotates once.Ģ Arrows = The Feed Container rotates twice with a 1 minute interval. The 'Feed Mode' offers 3 options, which are shown in the upper line of the Display, to the right of the Feed Digits (1-4). After about three days, the entire Display will blink and the device will shut off automatically in order to prevent the Feed Container from stopping in a downward position. The feeding procedure will still be carried out, but the batteries should be replaced. If the symbol 'LO' appears on the Display, it means that the batteries are almost empty. Insert the upper edge of the Drive Unit and pivot downwards until the lock engages. Pay attention to the proper polarity of the batteries.

To insert the batteries (2 x AA size 1.5V alkaline batteries), open the Housing Cover by applying light pressure on the Locking Clip.